1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189

//! Defines the tristimulus values of the CIE Illuminants.
//!
//! White point is the reference white or target white as seen by a standard
//! observer under a standard illuminant. For example, photographs taken indoors
//! may be lit by incandescent lights, which are relatively orange compared to
//! daylight. Defining "white" as daylight will give unacceptable results when
//! attempting to color-correct a photograph taken with incandescent lighting.

use crate::{from_f64, FloatComponent, Xyz};

/// WhitePoint defines the Xyz color co-ordinates for a given white point.
///
/// A white point (often referred to as reference white or target white in
/// technical documents) is a set of tristimulus values or chromaticity
/// coordinates that serve to define the color "white" in image capture,
/// encoding, or reproduction.
///
/// Custom white points can be easily defined on an empty struct with the
/// tristimulus values and can be used in place of the ones defined in this
/// library.
pub trait WhitePoint: 'static {
    /// Get the Xyz chromaticity co-ordinates for the white point.
    fn get_xyz<Wp: WhitePoint, T: FloatComponent>() -> Xyz<Wp, T>;
}

/// CIE standard illuminant A
///
/// CIE standard illuminant A is intended to represent typical, domestic,
/// tungsten-filament lighting. Its relative spectral power distribution is that
/// of a Planckian radiator at a temperature of approximately 2856 K. Uses the
/// CIE 1932 2° Standard Observer
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
pub struct A;
impl WhitePoint for A {
    fn get_xyz<Wp: WhitePoint, T: FloatComponent>() -> Xyz<Wp, T> {
        Xyz::with_wp(from_f64(1.09850), T::one(), from_f64(0.35585))
    }
}
/// CIE standard illuminant B
///
/// CIE standard illuminant B represents noon sunlight, with a correlated color
/// temperature (CCT) of 4874 K Uses the CIE 1932 2° Standard Observer
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
pub struct B;
impl WhitePoint for B {
    fn get_xyz<Wp: WhitePoint, T: FloatComponent>() -> Xyz<Wp, T> {
        Xyz::with_wp(from_f64(0.99072), T::one(), from_f64(0.85223))
    }
}
/// CIE standard illuminant C
///
/// CIE standard illuminant C represents the average day light with a CCT of
/// 6774 K Uses the CIE 1932 2° Standard Observer
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
pub struct C;
impl WhitePoint for C {
    fn get_xyz<Wp: WhitePoint, T: FloatComponent>() -> Xyz<Wp, T> {
        Xyz::with_wp(from_f64(0.98074), T::one(), from_f64(1.18232))
    }
}
/// CIE D series standard illuminant - D50
///
/// D50 White Point is the natural daylight with a color temperature of around
/// 5000K for 2° Standard Observer.
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
pub struct D50;
impl WhitePoint for D50 {
    fn get_xyz<Wp: WhitePoint, T: FloatComponent>() -> Xyz<Wp, T> {
        Xyz::with_wp(from_f64(0.96422), T::one(), from_f64(0.82521))
    }
}
/// CIE D series standard illuminant - D55
///
/// D55 White Point is the natural daylight with a color temperature of around
/// 5500K for 2° Standard Observer.
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
pub struct D55;
impl WhitePoint for D55 {
    fn get_xyz<Wp: WhitePoint, T: FloatComponent>() -> Xyz<Wp, T> {
        Xyz::with_wp(from_f64(0.95682), T::one(), from_f64(0.92149))
    }
}
/// CIE D series standard illuminant - D65
///
/// D65 White Point is the natural daylight with a color temperature of 6500K
/// for 2° Standard Observer.
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
pub struct D65;
impl WhitePoint for D65 {
    fn get_xyz<Wp: WhitePoint, T: FloatComponent>() -> Xyz<Wp, T> {
        Xyz::with_wp(from_f64(0.95047), T::one(), from_f64(1.08883))
    }
}
/// CIE D series standard illuminant - D75
///
/// D75 White Point is the natural daylight with a color temperature of around
/// 7500K for 2° Standard Observer.
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
pub struct D75;
impl WhitePoint for D75 {
    fn get_xyz<Wp: WhitePoint, T: FloatComponent>() -> Xyz<Wp, T> {
        Xyz::with_wp(from_f64(0.94972), T::one(), from_f64(1.22638))
    }
}
/// CIE standard illuminant E
///
/// CIE standard illuminant E represents the equal energy radiator
/// Uses the CIE 1932 2° Standard Observer
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
pub struct E;
impl WhitePoint for E {
    fn get_xyz<Wp: WhitePoint, T: FloatComponent>() -> Xyz<Wp, T> {
        Xyz::with_wp(T::one(), T::one(), T::one())
    }
}
/// CIE fluorescent illuminant series - F2
///
/// F2 represents a semi-broadband fluorescent lamp for 2° Standard Observer.
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
pub struct F2;
impl WhitePoint for F2 {
    fn get_xyz<Wp: WhitePoint, T: FloatComponent>() -> Xyz<Wp, T> {
        Xyz::with_wp(from_f64(0.99186), T::one(), from_f64(0.67393))
    }
}
/// CIE fluorescent illuminant series - F7
///
/// F7 represents a broadband fluorescent lamp for 2° Standard Observer.
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
pub struct F7;
impl WhitePoint for F7 {
    fn get_xyz<Wp: WhitePoint, T: FloatComponent>() -> Xyz<Wp, T> {
        Xyz::with_wp(from_f64(0.95041), T::one(), from_f64(1.08747))
    }
}
/// CIE fluorescent illuminant series - F11
///
/// F11 represents a narrowband fluorescent lamp for 2° Standard Observer.
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
pub struct F11;
impl WhitePoint for F11 {
    fn get_xyz<Wp: WhitePoint, T: FloatComponent>() -> Xyz<Wp, T> {
        Xyz::with_wp(from_f64(1.00962), T::one(), from_f64(0.64350))
    }
}
/// CIE D series standard illuminant - D50
///
/// D50 White Point is the natural daylight with a color temperature of around
/// 5000K for 10° Standard Observer.
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
pub struct D50Degree10;
impl WhitePoint for D50Degree10 {
    fn get_xyz<Wp: WhitePoint, T: FloatComponent>() -> Xyz<Wp, T> {
        Xyz::with_wp(from_f64(0.9672), T::one(), from_f64(0.8143))
    }
}
/// CIE D series standard illuminant - D55
///
/// D55 White Point is the natural daylight with a color temperature of around
/// 5500K for 10° Standard Observer.
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
pub struct D55Degree10;
impl WhitePoint for D55Degree10 {
    fn get_xyz<Wp: WhitePoint, T: FloatComponent>() -> Xyz<Wp, T> {
        Xyz::with_wp(from_f64(0.958), T::one(), from_f64(0.9093))
    }
}
/// CIE D series standard illuminant - D65
///
/// D65 White Point is the natural daylight with a color temperature of 6500K
/// for 10° Standard Observer.
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
pub struct D65Degree10;
impl WhitePoint for D65Degree10 {
    fn get_xyz<Wp: WhitePoint, T: FloatComponent>() -> Xyz<Wp, T> {
        Xyz::with_wp(from_f64(0.9481), T::one(), from_f64(1.073))
    }
}
/// CIE D series standard illuminant - D75
///
/// D75 White Point is the natural daylight with a color temperature of around
/// 7500K for 10° Standard Observer.
#[derive(Copy, Clone, Debug, PartialEq, Eq)]
pub struct D75Degree10;
impl WhitePoint for D75Degree10 {
    fn get_xyz<Wp: WhitePoint, T: FloatComponent>() -> Xyz<Wp, T> {
        Xyz::with_wp(from_f64(0.94416), T::one(), from_f64(1.2064))
    }
}