[−][src]Struct wiringpi::pin::PwmPin
To understand more about the PWM system, you’ll need to read the Broadcom ARM peripherals manual.
Methods
impl<P: Pin + Pwm> PwmPin<P>[src]
impl<P: Pin + Pwm> PwmPin<P>pub fn new(pin: c_int) -> PwmPin<P>[src]
pub fn new(pin: c_int) -> PwmPin<P>pub fn number(&self) -> c_int[src]
pub fn number(&self) -> c_intpub fn into_input(self) -> InputPin<P>[src]
pub fn into_input(self) -> InputPin<P>pub fn into_output(self) -> OutputPin<P>[src]
pub fn into_output(self) -> OutputPin<P>pub fn into_soft_pwm(self) -> SoftPwmPin<P>[src]
pub fn into_soft_pwm(self) -> SoftPwmPin<P>pub fn write(&self, value: u16)[src]
pub fn write(&self, value: u16)Writes the value to the PWM register for the given pin.
The value must be between 0 and 1024.
pub fn set_mode(&self, mode: PwmMode)[src]
pub fn set_mode(&self, mode: PwmMode)The PWM generator can run in 2 modes – "balanced" and "mark:space".
The mark:space mode is traditional, however the default mode in the
Pi is "balanced". You can switch modes by supplying the parameter:
Balanced or MarkSpace.
pub fn set_range(&self, value: u16)[src]
pub fn set_range(&self, value: u16)This sets the range register in the PWM generator. The default is 1024.
pub fn set_clock(&self, value: u16)[src]
pub fn set_clock(&self, value: u16)This sets the divisor for the PWM clock.
Auto Trait Implementations
Blanket Implementations
impl<T, U> Into for T where
U: From<T>, [src]
impl<T, U> Into for T where
U: From<T>, impl<T> From for T[src]
impl<T> From for Timpl<T, U> TryFrom for T where
T: From<U>, [src]
impl<T, U> TryFrom for T where
T: From<U>, type Error = !
🔬 This is a nightly-only experimental API. (
try_from)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>🔬 This is a nightly-only experimental API. (
try_from)Performs the conversion.
impl<T> Borrow for T where
T: ?Sized, [src]
impl<T> Borrow for T where
T: ?Sized, impl<T> Any for T where
T: 'static + ?Sized, [src]
impl<T> Any for T where
T: 'static + ?Sized, fn get_type_id(&self) -> TypeId[src]
fn get_type_id(&self) -> TypeId🔬 This is a nightly-only experimental API. (get_type_id)
this method will likely be replaced by an associated static
Gets the TypeId of self. Read more
impl<T> BorrowMut for T where
T: ?Sized, [src]
impl<T> BorrowMut for T where
T: ?Sized, fn borrow_mut(&mut self) -> &mut T[src]
fn borrow_mut(&mut self) -> &mut TMutably borrows from an owned value. Read more
impl<T, U> TryInto for T where
U: TryFrom<T>, [src]
impl<T, U> TryInto for T where
U: TryFrom<T>,